Description
: High builld aluminium pigmented chlorinated rubber primer/sealer
Principal Characteristics
: anticorrosive primer/sealer
: excellent water resistance
: unsaponifiable
: resistant to well designed/controlled cathodic protection
: fast drying
: can be applied at low temperatures
: tolerates a dft upto 150 mm at overlaps without sagging
Colours and Gloss
: grey, reddish grey - flat
Basic data at 30 ˚C
Solid content
: approx. 42% by volume
Recommended dry film thickness
: 50-100µm depending on system
Theoretical spreading rate
: 8.4 m2/litre for 50µm, 4.2 m2/litre for 100µm on smooth, non absorbant surfaces
Touch dry after
: 1 hour at 20 ˚C & 30 minutes at 30 ˚C
Overcoating interval
: minimum 4 hours at 30 ˚C
: maximum unlimited provided surface is cleaned
Shelf life (cool and dry place)
: atleast 12 months
Flash point
: 26 ˚C
Recommended substrate conditions and temperature
: Steel; blast cleaned to Sa 21/2 of Swedish specification
: Primed steel or previous coat; dry and free from any contamination
: Galvanized steel; dry and free from any contamination and zinc salts
: Substrate temperature should be atleast 3 ˚C above dew point