Epoxy Zinc Rich Primer

A two pack cold curing system gives protection to freshly shot blasted steel surface. The Zinc pigment in dry film provides an excellent protection to steel surface, tanks, pipelines and plant components in both interior and exterior exposed conditions. It also provides cathodic protection to steel and gives good resistance to undercoating of damaged areas. It can be overcoated with wide range of topcoats.

Technical Data

• Composition

• : Epoxy Resin Pigmented with Zinc Dust

• Colour

• : Grey

• Finish

• : Matt

• Mixing Ration

• : 4:1 bt Volume

• Recommended DFT

• : 25-30 microns

• Zinc Dust Content on DFT

• 90+2%

• Theoratical Coverage

• : 13 to 15 sq. met. at a recommended DFT

• Application

• : Airless spray or brush

• Pot Life

• : 4 to 6 hours at 30 ˚C

• Shelf Life

• : 12 months (of individual components)

• Drying

• : Surface Dry : 10-15 minutes.
  Hard Dry : 1 to 2 hours
  Fullcure : 7 Days

• Overcoating Interval

• : overnight

• Maturation Time On Mixing

• : 10-15 mins

• Spraying Viscosity

• : 20+2"/FC-4 at 30 ˚C

• Temperature Resistance

• : 300 ˚C dry heat

• Flash Point

• : Above 25 ˚C

• Compatibility

• : Tack-free : Can be overcoated with all type of paints