Description
: High glass alkyd finishing coat
Principal Characteristics
: Suitable for interior and exterior use
: Easy application by brush with excellent flow
: Good weather resistance
: High opacity
: Good colour retention
: Gas proof; no discolouration with sulphur dioxide
: No suitable for immersion in water or continuous splash of water
: Can be applied over intact alkyd points
Colours and Gloss
: White (Other colours available on request) - glass
Basic data at 30 ˚C
Solid content
: approx. 50% by volume
Recommended dry film thickness
: 35µm per coat
Theoretical spreading rate
: 14.3 m2/1 for 35µm
Touch dry after
: 2 Hours
Overcoating interval
: min. 16 hours
max. unlimited; provided surface is cleaned
Shelf life (cool and dry place)
: atleast 12 months
Flash point
: 36 ˚C
Recommended substrate conditions and temperature
: Previous suitable coat; (e.g. Asmiramarine undercoat, Asmiramarine primer ZP) dry and free from any contamination and sufficiently roughened if necessary
: Substrate temperature should be atleast 3 ˚C above dew point
Instruction for use
: stir well before use
: The temperature of the point should be above 15 ˚C otherwise extra thinner may be required to obtain application viscosity