Marine BTD

Technical Data

• Description

• : A general purpose goss paint based on a modified alkyd resin

• Principal Characteristics

• : particularly suitable as a finish for boottop, topside, deck and deck-equipment

  
  

  : a quick-drying, hard, tough, water and weather resistant coating with moderate glass retention, both in sunlight and water-immersion

  
  

  : can be applied over intact existing conventional systems, on Asmiramarine undercoat and on suitableprimers, such as Asmiramarine ALU primer, Asmiramarine primer ZP or Asmiramarine primer RL depending on the location

  
  

  : good adhesion properties in wet and dry exposureconditions

  
  

  : this coating is particularly suitable for areas intermittenty exposed to water-immersion and atmoshpheric conditions

  
  

• Colours and Gloss

• : see marinecare shade card - glass

• Basic data at 30 ˚C

• Solid content

• : approx. 49.53% (colours) - 49% (white) by volume

• Recommended dry film thickness

• : 35 mm per coat

• Theoretical spreading rate

• : 15.1 m²/litre (colours) - 14.0 m²/litre (white) for 35µm on smooth, non absorbant surfaces

• Touch dry after

• : 1 hour

  
  

• Overcoating interval

• : minimum 16 hours at 20 ˚C, 12 hours at 30 ˚C

  
  

  : maximum no limitations; provided surface is cleaned

• Shelf life (cool and dry place)

• : atleast 12 months

• Flash point

• : 36 ˚C

• Recommended substrate conditions and temperature

• : Previous coats; free from any contamination

  
  

  : The temperature of the substrate must be at least 3 ˚C above dew point